Home / All / Textile machinery / French Machinery – Strategic Partners of the Turkish Textile Industry

French Machinery – Strategic Partners of the Turkish Textile Industry

Welcome and thanks for visiting the French Machinery Manufacturers website. The following companies will show their latest state-of-art machinery at ITM 2018. They will be honoured to welcome you on their booths. If you have any question do not hesitate to contact them.

 NSC Fibre to Yarn   Hall 3 Booth 315D

Production: 1 ton per day in 3 deniers. (3 shifts)NSC fibre to yarn continues to develop and propose Tow to Top lines with the model S200 of stretch breaker followed by the new model of defelter rebreaker model D5GC40 and GC40 chain gill. As finisher m/c, the FMV41/42 vertical rubbing frame takes place.
Recently, NSC fibre to yarn has installed semi worsted lines with SW35 carding m/c card (2.5 m or 3.5 m wide), followed by preparation lines consisting of chain gills model GC 40 and finishers m/c model FMV41/42.


NSC fibre to yarn proposes to modernize recycling lines for acrylic fibres or blended fibres by introducing its well-known combing machine ERA between card and gills drafting. The contribution of the combing machine ERA is economically essential according to 4 points of view:

  • Cleanliness: 25% of neps less compared with PB family m/c.
  • Energy consumption: Equipment with economic saving: use of energy efficient motors.
  • Reduced consumption of spare parts owing to a new design of kinematics.

A logistics for spare parts have been established with the BILGE/Automation company.


 LAROCHE   Hall 3 Booth 313B / Hall 9 Booth 904B

LAROCHE has been a strong partner for many major Turkish companies in the nonwoven and recycling industries for more than 30 years. LAROCHE provides a full range of engineering, development and support services for turnkey projects.LAROCHE will show a full range of products made from their latest technologies. After more than 40 years of experience in blending technology Laroche will notably introduce the new weighing hopper feeder, and the latest innovations in blending.  The hottest topics are: used clothes recycling processes and acoustic insulation panels with Laroche Airlay technology.

In Cours-La Ville – France, a 2000 m² technical center equipped with the company’s latest technologies, allows to test and prove the technical solutions on industrial lines. Customers are welcome to use these facilities to develop their new products.

As usual, the company’s sales and after sales service and spare parts teams, follow up each customer throughout the life time of the equipment. LAROCHE serves highly satisfied customers in more than 70 countries. Thanks to their experience, resources and support, LAROCHE provides turnkey solutions from sales, engineering, manufacturing and services.


SUPERBA   Hall 2 Booth 212A

With more than 150 TVP3 lines to heat-set carpet yarn and over 60 LV3 lines for Acrylic running in Turkey, SUPERBA have established themselves as the benchmark in terms of quality for carpet yarn processing for all types of yarns (PET, PP, PA, PAN, Wool & blends).SUPERBA, world leader in heat-setting and space-dyeing for carpet yarn, and member of the Vandewiele family of companies, is well established in Turkey with their agent Samoteks in Istanbul, a permanent team of technicians on the field, and BILGE their partner in Gaziantep, acting as the official distributor for spare-parts with a large inventory immediately available.

Recent developments are focused on the space-dyeing with the latest version of the MCD/3 machine capable to handle a layer of 72 ends with exclusive dyeing effects such as the bi-color printing or the tone-on-tone effect. The MCD/3 can space-dye with up to 6 colors, polyester or polyamide in combination with the TVP3 heatsetting line, but also acrylic fibers with the new high capacity DL/5 fixation line. The synergy and co-working with Vandewiele weaving or tufting machines offers now to the customers the possibility of new creations with a very efficient time-to-market.


FIL CONTROL   Hall 3 Booth 316C

FIL CONTROL is specialized in studying, developing, producing and selling equipment devices for the textile machinery industry.
With their 3 major fields: yarn cutters, yarn break sensors and quality control equipment, FIL CONTROL offers its customers and partners solutions to control the yarn. This is a key point to insure a reliable manufacturing process and a protection of the textile machine.

Thanks to the skills and experience of their engineering department, in electronic, mechanic and design, FIL CONTROL can answer to generic needs, but also to any kind of bespoken demands, by adapting or developing their products to answer to each specific application of their customers.

A lot of the world’s famous textile machinery manufacturers already trust in FIL CONTROL for many years.


PETIT Spare Parts   Hall 3 Booth 316C

PETIT Spare Parts has a consequent and permanent storage capacity of spare parts with more than 20 000 references multi brand for fine count textile machines especially for ICBT and looms for Saurer-Diederichs.
An acknowledged know how with a wealth experience in the field of covering, texturizing, twisting.  PETIT Spare Parts is the specialist in the trade of accessories for textile machines.


SPOOLEX GROUP  Hall 3 Booth 312

Turkey, the Middle East and North Africa (MENA) region, have largely contributed to SPOOLEX’s success story.

Calemard, Converting equipment division of Spoolex Group
All over the world, more than 2000 Calemard equipment converts various kinds of demanding materials into slit rolls or spools.
In hygiene, with 38 Jumbo spooling lines in operation worldwide, the widest high-speed spooling line for ADL in the world and a fully automated Pegase 3 Spooling Cell in Asia, SPOOLEX Group confirms the world leading position of its Calemard machinery brand in providing spooling solutions for tension sensitive materials.
Calemard machineries also include wide slitter-rewinders with state of the art technologies for high productivity and reliability, versatility and ergonomics with handling solutions and automation.

Decoup+, Ultrasonic cutting/sealing division of Spoolex Group
On Spoolex’s ultrasonic area, Decoup+ brand proposes different cutting and sealing equipment, applicable at any stage of the production and converting process. From handheld devices for final make-up operations, to module to be integrated on weaving looms, stenters or off-line machines, Decoup+’s industrial range of proven solutions are specifically adapted to continuous operations.


DOLLFUS & MULLER   Hall 10-12 FUAYE Booth F13

DOLLFUS & MULLER manufactures endless felts and dryer belts for the textile finishing factories.
The Turkish customers have been long time users of:

  • compacting felts for knit finishing
  • sanforizing felts for denim and woven fabrics finishing
  • printing dryer belts for textile printing and digital printing
  • sublimation blankets for transfer printing.

DOLLFUS & MULLER introduced two years ago its improved compacting felt for knit finishing with major evolutions. The compacting felt quality brings a special care to the fabrics thanks to its smoothest surface, has an excellent guiding and the best compacting rate in relations with its new exclusive compacting felt design.
The DOLLFUS & MULLER sanforizing palmer felts are ideal for denim producers. Its proven durable sanfor Palmer felts are widely used all around the world including Turkey, especially by denim processing houses. The DOLLFUS & MULLER Sanfor felts are recognised by most of the major machine makers as the best felts.

Furthermore, Dollfus & Muller manufactures a wide range of print dryer belts for each application: for pigment printing of bed sheeting, for the production of fine fabrics, scarves, flags (these belts have special non-marking surfaces which can avoid as well the particles on the back side). The company manufactures many exclusive dryer belts for digital printing dryers. DOLLFUS & MULLER has the widest range of printing dryer belts and the strongest dryer belts.

The Turkish market is very important for DOLLFUS & MULLER, it is represented by different agents in Turkey, such as:

  • for compacting felts, Mr. Ali CETIN, company CETIN MAKINE
  • for sanforizing felts, printing dryer belts and sublimation blankets, Mr. Sunay YILMAZ, company NES TEKSTIL


AESA   Hall 3 Booth 310A

AESA Air Engineering which supplies complete textile air engineering systems in order to maintain the required temperature and humidity adapted to each type of fiber (cotton, rayon, polyester, blends, wool, acrylic).  Scope of supply ranges from simple textile air conditioning stations to turnkey textile air engineering projects, including centralized dust collectors, baling press systems, chiller and refrigeration plants, ducting and piping. Air engineering is very important for our Turkish customers.


Subscribe Newsletter

Join now to BIGGEST TEXTILE NETWORK in the Middle East and Africa region
  • This field is for validation purposes and should be left unchanged.

Leave a Reply

Your email address will not be published. Required fields are marked *